base for royal scientist

Home Forums General Discussion base for royal scientist

This topic contains 7 replies, has 4 voices, and was last updated by Joe Joe 3 years, 5 months ago.

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #2785

    brinrichter
    Participant

    Recently received a Martian Royal Scientist for a xmas present, upon assembly the base that was included was an oval that the miniature did not even fit on. I was wondering if I could exchange it for one of the round ones with the 3 holes in it. LMK

    #2798
    Oddball
    Oddball
    Participant

    I too got a Royal Scientist for xmas. I’m pretty sure mine fits on it’s base. I’ll get some photos as soon as possible.

    #2801
    Oddball
    Oddball
    Participant

    Base comparison with Scientist

    #2803
    Oddball
    Oddball
    Participant

    From what I can see, my Royal Scientist fits perfectly.

    #2804
    Oddball
    Oddball
    Participant

    As for the lack of holes, I’m going to cut off the small nub at the base of each leg.

    #2811

    brinrichter
    Participant

    here is a picture of the base i got miniature does not fit will have to bend legs in and remove bottom stub did not want to do that

    #3928

    Micman
    Participant

    Unfortunately for me I have one from AD and that did not have a base.

    #3931
    Joe
    Joe
    Moderator

    Micman, send me your address (joe@quietmartianfront.com) and I can get you a base for your Tripod.

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.

Comments are closed